Swiger Coil has repaired and manufactured traction motors for over 30 years. Our process has continually improved to provide our customers will flawless service and execution. Our extensive experience allows us to repair traction motors in less than two weeks.
Our Basic Overhaul Includes:
Disassemble motor
Clean all parts
Inspect all metal parts for distortion and wear
Electrical test the armature and field coils
Surge test
Ground test
Core loss test the armature
VPI the armature and frame in SILICONE resin.
Note, if the unit was processed in anything but silicone, it will be VPI’d in Polyester or a Co-polymer, your choice
Turn, undercut, and balance the armature
Test the armature and field coils after VPI
New brushes
New bearings
Rebuilt brush holders
New seals and gaskets
New hardware
Run test the motor under no load condition.
Load testing is not requested, but is available for an additional cost if required.
Check the running vibration on the assembled motor
Paint the motor
Extensive Testing and Quality Assurance
To ensure every traction motor adheres to the highest quality and reliability, Swiger Coil thoroughly tests all repaired traction motors. We utilize core testing, load testing and high speed run outs to ensure that the motor will operate to specifications. In addition, our OEM Motors are repaired with 100% inspection on all parts to eliminate component failure. We also perform AC/DC Highpot testing and rewind all armatures and the stators to ensure quality. Swiger Coil is ISO 9001-2000 Certified so that our customers understand our commitment to quality.
Our customers love our business because of our meticulous attention to detail and understanding of the mission critical role traction motor repair plays in their business.
Wide Range of Manufacturers
• EMD • GE • ABB • Westinghouse • WABCO • Stone Safety •
Exclusive authorized repair and remanufacture center for Westinghouse Air Brake Company (WABCO), owner of the former Stone Safety Service Corporation DC motors.
Authorized licensee for repair and remanufacture of Adtranz traction motors; Agreement inclusive of motors, coils and components.
Rebuild Track Brakes
Remanufacture Reactor Coils
We can also include repair or replacement of:
Labyrinths
Baffle ring
Pole pieces
Replacement brush holders (new)
Thrust collars
Distance piece
Terminal boxes
Drip guards
Bearing bores
Shaft replacement with
bore out costs
Vent guards
Contact Swiger Coil
Swiger Coil is committed to providing the best customer service and products. Contact us today for more information about our products or services and what they can do for your business.
Dave Mann
Marketing Manager
Traction and Transit Motors
216.362.7500 (Ext. 220)
Email: davidmann@swigercoil.com
Cell: 216.533.8656
Fax: 216.362.1496
Bob Hartman
Technical Sales
Traction and Transit Motors
216.362.7500 (Ext. 209)
Email: roberthartman@swigercoil.com
Cell: 216.702.7159
Fax: 216.362.1496
SEPTA, NJ Transit, Adtranz, Westinghouse, and GE are the property of their respective owners. We neither endorse nor are affiliated with these companies.
